Ag Mechanics Tool ID

Tubular Wire Electrode:Tubular electrode (e.g. E-70T-L) is flux cored., and the last number is position and usability capabilities, as no gas is required for tubular flux cored rod. See Solid Welding Wire Electrode. Also called innershield wire since the shielding flux is "inside".
(Welding-Arc Welding Electrodes)
Solid Welding Wire Electrode:Identified in a similar manner as SMAW rod . For example ER-70S-4. Solid wire is classified in a ER means it is an electrode, 70 is tensile strength, S means it is solid wire, 4 is type of shielding gas. Shield Gases: 2. C02A-O,A-C02, 3. C02A-O,A-C02, 4. CO2, 5. CO2, 6. C02A-O, 7. C02A-O,A-C02 and C02=Carbon Dioxide, C02A-O=Carbon Dioxide, Argon and Oxygen, A-CO2 = Argon and CO2
(Welding-Arc Welding Electrodes)
SMAW Electrode:Electrode used in the SMAW process for example E-6010. E meaning it is an electrode, 60 means it has a tensile strength of 60,000 PSI, 1 indicates welding in all positions, 0 indicates the coating to be cellulose sodium and the welding current is DCEP or direct current electrode positive
(Welding-Arc Welding Electrodes)
Hard Facing Electrode:Hard facing rod is not classified by a numbering system. Each manufacturer has their own nomenclature for their particular rod.
(Welding-Arc Welding Electrodes)
Tungsten Electrode:Non-consumable electrode used for GTAW process welding.
(Welding-Arc Welding Electrodes)
Leather Gloves:Gauntlet style gloves are recommended.
(Welding-Arc Welding Tools)
Electrode Holder:Connected to the welding cable and holds the electrode for SMAW process welding.
(Welding-Arc Welding Tools)
Welding Helmet:A colored lens filters out harmful light rays. Len shades
(Welding-Arc Welding Tools)
Chipping Hammer:One end of the head is shaped with a blunt point, and the other end is shaped like a cold chisel. Also called Slag hammer,
(Welding-Arc Welding Tools)
GMAW wire feed:Used with a constant voltage power supply and a gas source (e.g. carbon dioxide, argon) for GMAW process.
(Welding-Arc Welding Tools)
Gas Regulator:Used with GMAW and GTAW to control the flow of shielding gas.
(Welding-Arc Welding Tools)
Ground Clamp:Used to connect one of the cable leads from the welding machine to the welding table or the material being welded so as to make a complete circuit.
(Welding-Arc Welding Tools)
Plasma Cutter:Uses an arc and compressed gas to create a plasma stream for cutting and gouging of ferrous and non-ferrous metals.
(Welding-Arc Welding Tools)
GTAW Torch:Holds a non-consumable electrode and directs shielding gas to the weld.
(Welding-Arc Welding Tools)
Arc Welder Power Supply:Converts AC power to welding current. SMAW and GTAW processes use constant current power supplies and GMAW processes use constant voltage power supplies.
(Welding-Arc Welding Tools)
Spot Welder:Used for welding sheet metal.
(Welding-Other Welding Equipment)
Welding Goggles: Used to protect the eyes from harmful rays and from spatter when using the welding torch.
(Welding-Oxyacetylene Welding Tools)
Tip Cleaner:It consists of several needle-like round files of different sizes.
(Welding-Oxyacetylene Welding Tools)
Torch Handle:Quite often called a torch butt.
(Welding-Oxyacetylene Welding Tools)
Welding Tip:The tips come in various sizes.
(Welding-Oxyacetylene Welding Tools)
Heating Tip:A tip with multiple orifices used to for heating metal usually for bending. Also called a rosebud.
(Welding-Oxyacetylene Welding Tools)
Cutting Tip:The larger center hole is for pure oxygen to oxidize or cut the metal.
(Welding-Oxyacetylene Welding Tools)
Cutting Torch:It consists of valves for mixing oxygen and acetylene, and a valve lever attached to the torch handle to release oxygen which does the cutting.
(Welding-Oxyacetylene Welding Tools)
Brazing Rod:Available in1/16 to 3/16 inch diameter and 36 inches long.
(Welding-Oxyacetylene Welding Tools)
Copper Coated Mild Steel :Available in 1/16 to 3/16 inch diameter and 36 inches long.
(Welding-Oxyacetylene Welding Tools)
Flux Coated Brazing Rod:Generally available in 1/8 inch diameter rod.
(Welding-Oxyacetylene Welding Tools)
Acetylene Regulator:The threads on the hose connector are left hand.
(Welding-Oxyacetylene Welding Tools)
Oxygen Regulator:The threads on the hose connector are right hand. Commonly a two stage regulator.
(Welding-Oxyacetylene Welding Tools)


This site was developed by Mike Spiess (Chico State) copyright 1999-2020; for instructional use only. PDF services provided by: www.sejda.com Home | PDF
maintain